Updating the Date and Time on Your Terminal

Updating the Date and Time on Your Terminal

For instructions on how to update the date and time on your terminal, look for your terminal type below and follow the instructions.

Ingenico Terminals

On your Ingenico terminal, the date and time is automatically updated by the application when a transaction is completed.

 To manually adjust the date and time:

1. Press the [F] key
2. Key in Admin password (Default password is: 123456A (for A press 2 then the F key) and press [ENTER]
3. Press the [0] key for Telium Manager
4. Press the [3] key for Initialization
5. Press the [1] key for Parameter
6. Press [ENTER] for Date and Time
7. Select SET DATE or SET TIME by using the arrow keys and pressing [ENTER]
8. Date format is MMDDYYYY
9. Time format is HHMM in military time (1:00 pm = 1300)
10. Press [ENTER] once after correct information has been keyed
11. Press [CANCEL] until Idle screen appears

Verifone Terminals – Omni or Vx Terminals

 Omni or Vx Terminal

1. From the Idle screen, press the [ENTER] key
2. Select SETUP (Usually the [F2] key, but you may need to press the [MORE] purple key until the option appears)
3. Key in password: [1][ALPHA][ALPHA][6][6][8][3][1]
4. Press the [MORE] key until option TIME/DATE appears and select
5. Key in current date (MMDDYYYY)
6. Key in desired time (HHMMSS). Must be in military time (1:00 pm = 1300)
7. Press the [CANCEL] key until Idle screen appears

Hypercom – T7P/T7Plus

 For T7P and T7Plus

1. Press the [INITIALIZE] key
2. If prompted, key in password. Default password is: 0000
3. Press [ENTER] for YES

If this process does not update the date/time on your terminal:

1. Press the [FUNCTION] key
2. Key in [10]
3. Press the [ENTER] key
4. If prompted, key in password. Default password is: 0000
5. Key in the current date (YYMMDD), then press [ENTER]
6. Key in desired time (HHMM). Must be in military time (1:00 pm = 1300)
7. Press the [ENTER] key

Hypercom Optimum T4205/T4220

 For Optimum T4205 and T4220

Adjusting current time

1. Press the [FUNCTION] key
2. Key in [10] and press the [ENTER] key
3. If prompted, key in password and press the [ENTER] key (default password is 000000000)
4. Key in the current date (YYMMDD), then press [ENTER]
5. Key in desired time (HHMM). Must be in military time (1:00 pm = 1300), then press [ENTER]

Lipman (Nurit) Terminal

1. Press the [MENU/ESC] key
2. Use the DOWN ARROW and highlight System Options then press [ENTER]
3. Press the [ENTER] key for set Time/Date
4. Press the [ENTER] key to modify shown Date/Time
5. Key in the current date (MMDDYY) then press [ENTER]
6. Key in the current time (HHMM) then press [ENTER]
7. Press the [MENU/ESC] key three times to return to the Main Menu